Availability: Low stock: 1 left
Couldn't load pickup availability
One of the most comprehensive tuning manuals ever produced by LaSota Racing, this guide delivers over 100 pages of detailed Ford EFI tuning information for professional tuning shops and serious automotive enthusiasts.
Designed specifically for those using Moates tuning hardware and Binary Editor software, this manual focuses entirely on practical tuning techniques rather than basic hardware setup or software navigation. By eliminating introductory instructions, the guide provides more in-depth coverage of essential tuning strategies, advanced calibration methods, and troubleshooting procedures.
Whether you're developing a base calibration or fine-tuning a high-performance application, this manual offers valuable information for achieving optimal engine performance, drivability, and reliability.
Ford EFI tuning applications for most Ford vehicles from 1988–2010
Basic and advanced tuning techniques
Vehicle preparation before tuning
Developing and refining a base calibration
Idle tuning and optimization
Part-throttle tuning and drivability
Wide-open-throttle (WOT) tuning
Fueling, transient fueling, and lost fuel compensation
Ignition timing and spark calibration
Two methods for dialing in MAF transfer functions
Camshaft-related tuning considerations
Failed MAF tuning strategies
Fuel pump voltage adjustments
Datalogging and advanced data analysis
E85 and E10 fuel tuning
Water/methanol injection tuning
Coasting fuel adjustments
Troubleshooting idle, part-throttle, and WOT issues
Advanced tuning considerations for 2005+ Ford vehicles
Knock sensor calibration
Variable camshaft timing
Additional advanced tuning strategies and calibration techniques
Format: Printed Manual
Binding: Heavy-duty wire binding
Length: 100+ pages
Application: Most Ford EFI vehicles, 1988–2010
Recommended For: Professional tuning shops, experienced tuners, and dedicated performance enthusiasts
Please Note: This is an advanced tuning reference. Basic Moates hardware setup and Binary Editor software configuration instructions are not included.
